Wall-mount Metal Enclosure 16x16x8" with front knockouts, Multi-purpose

Description

This controller enclosure measures 16" x16" x 8" (400 x 400 x 200 mm). Different than other enclosures, this 16 gauge enclosure comes with four 1/16 DIN knockouts on the front, and knockouts for heat sink with screw mounting holes on the top. User can remove those knockouts if needed.
The knockout on the front design will save a lot of time and effort for most users that don't have the tools/machinery to cut square holes. User may need to cut some round holes for switches and connectors. But round shaped holes are much easier to cut on the sheet metal than square holes. Four precut holes are set equal intervally on the same horizontal level. The distance from top of hole to the top of enclosure is 91mm (3.58"). The distance from left of hole to the left of enclosure is 65mm (2.56").
This box is made of powder coated, 0.060" (1.5 mm) thick steel (rated as NEMA 4), which is available in a beige color.  The door comes with a lock and key. The hinges of the door are removable. It can be installed on either right or left side. Gasket and plugs are provided. The enclosure is designed to be mounted on a wall. You can directly mount it with screws or hang it on the wall with the hangers (included).
An external mounted heat sink option for 80 Amp is offered. The heat sink comes with pre-drilled and tapped mounting holes for SSR mounting. Up to 3 SSRs can be mounted. This externally mounted heat sink eliminates the venting requirement of the enclosure for internally mounted heat sink. The dimension for the heat sink is 135mm x 250mm x 30mm (5.3" x 9.9" x 1.2").
For international customers, please contact seller for shipping quote.
Part list:
Enclosure: 1 pc
80A heat sink (Optional): 1 pc
Soft caps: 6 pcs
Grounding sticker: 1 pc
Hanger: 4 pcs
Hanger screw and nut: 4 sets